EV Charging Cable
Type 2 to Type 2 EV Charging Cable – 7 kW / 22 kW
Charge a compatible electric or plug-in hybrid vehicle from a Type 2 AC charging point with a practical cable designed in accordance with the IEC 62196 Type 2 connection standard.
Product highlights
Type 2 at both ends
Connects a Type 2 vehicle inlet to a socketed Type 2 AC charging station.
Multiple configurations
Available in 16 A and 32 A versions with 7 kW and 22 kW listed power options.
Flexible lengths
Choose 5 m, 7 m, or 10 m to suit different parking positions.
IP55 protection
Defined protection against dust and water jets when correctly connected and stored.
Technical specifications
Connection: Type 2 to Type 2
Standard: IEC 62196 Type 2
Rated current: 16 A or 32 A
Power options: 7 kW or 22 kW
Lengths: 5 m, 7 m, or 10 m
Protection: IP55
Application: AC charging
Vehicles: Compatible BEV and PHEV models
Specifications vary by selected version. Check current rating, power configuration, and length before ordering.
Compatibility
For a vehicle with a Type 2 AC inlet and an AC charging point with a Type 2 socket. Charging speed depends on the vehicle onboard charger, station output, electrical supply, phase support, and selected cable version.
The 22 kW configuration generally requires compatible three-phase equipment and a vehicle able to accept the corresponding AC input. It is not intended for Type 1, GB/T, NACS, CCS-only, CHAdeMO, or other incompatible connections.
Connect, charge and store safely
Follow these steps for a safe and reliable charging session.
- 1
Prepare
Park safely within reach and inspect the cable and connectors.
- 02
Connect the station
Insert the charging-station end fully into the Type 2 socket.
- 03
Connect the vehicle
Insert the vehicle end fully into the vehicle inlet.
- 04
Start charging
Start and confirm the session using the station, vehicle, card, or app.
- 05
End the session
Stop or unlock the charging session before disconnecting.
- 06
Disconnect safely
Remove the vehicle connector first, then the station connector.
- 07
Store the cable
Keep the cable clean, dry, and loosely coiled between uses.
Safety, care, and storage
- Use only with compatible Type 2 AC charging equipment.
- Do not use damaged, wet, dirty, crushed, sharply bent, or modified cables.
- Do not touch contacts, immerse connectors, or use pressure washing.
- Fully uncoil during charging where practical and stop if unusual heat, odour, noise, or repeated interruption occurs.
- Clean with a soft dry or slightly damp cloth and allow connectors to dry fully.
IP55 does not mean the cable is suitable for immersion or use with damaged or uncovered contacts.
Frequently asked questions
Will it charge at 22 kW?
Only when the cable, charging station, electrical supply, and vehicle all support 22 kW AC charging. The lowest-rated component limits the actual rate.
Does the cable include a charger?
No. It is a connection cable between a compatible AC charging station and vehicle.
Can it be used at a public station?
Yes, when the station has a socketed Type 2 AC outlet.
How do I choose a version?
Verify connector compatibility, 16 A or 32 A current, 7 kW or 22 kW configuration, phase support, station output, vehicle AC capacity, and preferred 5 m, 7 m, or 10 m length.
The cable’s maximum rating does not guarantee the charging speed achieved by a particular vehicle.